Virginia Electric Power Co. orders Mitsubishi natural gas turbines

Mitsubishi GAC-Series gas turbine
Sponsored by

Mitsubishi Hitachi Power Systems Americas won an order from Virginia Electric and Power Co. (VEPCO) headquartered in Richmond, Virginia, for the supply of three M501J gas turbines to be installed at VEPCO’s Greensville County Power Station (subject to project approval by the State Corporation Commission).

The three gas turbines will be manufactured and assembled at MHPSA’s Savannah Machinery Works (Savannah, Georgia) to support a project completion date of year-end 2018.

The new gas turbine combined cycle (GTCC) power plant combines the output of the three, highly efficient M501J gas turbines with a steam turbine resulting in the largest new construction GTCC block in North America. Using low cost natural gas, the plant will produce about 1600 MW, enough to power over 400,000 homes.

This order is the third MHPSA advanced design gas turbine order placed by VEPCO over the last 5 years. The other two sites, Warren County and Brunswick County Power Stations, utilize three M501GAC gas turbines combined with a steam turbine.

Warren County has already achieved commercial operation and Brunswick County will follow in 2016. All three sites are covered by an MHPSA long-term maintenance agreement to provide parts, repairs and maintenance services plus remote monitoring of vital operating data.

The M501J is the most efficient large frame gas turbine in commercial operation with 17 turbines accumulating over 126,000 operating hours for six different owners. Worldwide, there are contracts for 36 Mitsubishi Hitachi Power Systems J class gas turbines, including 6 in North America.

The M501J resulted from the pioneering efforts of Mitsubishi Hitachi Power Systems in development of market leading, highly efficient gas turbine technology accumulated from 20 years of analysis, test and operation of 60 Hz gas turbines over 250MW. Mitsubishi Hitachi Power Systems leads all other OEMs in this class of turbine, with 116 units either in operation or under contract.

GTCC power stations use gas and steam turbines in combination to generate electricity in two stages; electric power from the gas turbine and then using high-temperature exhaust gas from the gas turbine to produce the steam to drive the steam turbine. This configuration enables GTCC power plants to achieve a higher thermal efficiency, which in turn reduces fuel consumption and lowers emissions.

Sponsored by

Get All the Electric Light & Power and POWERGRID International to Your Inbox

Subscribe to Electric Light & Power or POWERGRID International and the email newsletter today at no cost and receive the latest news and information.

Related Articles

Lobbyist-packed NRC may be listening to calls for less nuclear oversight

03/18/2019

Annie Caputo, a former nuclear-energy lobbyist now serving as one of four board members appointed or reappointed by Presid...

FPL announces plans to build four new solar power plants in 2019

03/05/2019 Florida Power & Light Company (FPL) this week announced plans to build four new solar power plants this year that are expe...

Power plant cancels plan to repower with natural gas

03/01/2019

The president of South Jersey Gas says they have already begun to pursue other options

New Orleans OKs settlement, clears way for gas power plant

02/22/2019

A council-led investigation found that Entergy New Orleans officials "knew or should have known" about the use o...